NOVUS-R (Normal, Fractional & VRL)

Here is the cost effective Fractional C02 laser by Novus Lase

High Quality - Titanium Arm - Modular Design - Intuitive Display

MAX POWER 50 WATTS

What is Fractional Laser Skin Resurfacing?

Laser resurfacing is a treatment to improve the look of the skin. It uses laser to send out brief pulses of high-energy light. This light is absorbed by water and substances in the skin called chromophores. The light is changed into heat energy. The heat then destroys (vaporizes) thin sections of skin, layer by layer. As the wounded area heals, new skin grows to replace the damaged skin that was removed during the laser treatment. Some lasers only tighten the skin by heating it but do not destroy the skin.The CO2 (carbon dioxide) laser is the most common type of laser used for resurfacing. Erbium lasers are also used often.In most cases, laser resurfacing is very precise and causes little damage to the surrounding skin and tissue. It is done most often on the face, but it may be done on skin in other areas of the body. It's usually not done on the hands, neck, and chest. The skin in these areas does not heal as well as it does in other areas. 

Origination

CO2 fractional laser technology has been the latest and the greatest technology these past several years in the United States as well as in the skin community all over the world. It is a kind of minimal invasive surgery, which lies in between invasive and non-invasive treatment. This technology is known as Fractional Photothermolysis theory (dot-matrix light and heat decomposition), which was published in 2004 by Dr. Rox Anderson, one of the laser medical experts from Harvard University. This theory was immediately approved and applied by experts from all over the world.

Fractional Photothermolysis (selective photothermolysis effect) theory is an extension of the traditional theory of Selective Photothermolysis .it has not only rapid and evident results like invasive treatment, but also less side effects and shorter recovery time like the non-invasive treatment. Which means this technology combines both the advantages of the traditional technologies. It is to evenly mark with tiny holes, and then there will be a series of biochemical reactions inside the skin, thus Lift the skin and remove speckles and pigments.

As the fractional laser treatment will only cover part of the skin tissue as well as the new tiny holes do not overlap, therefore part of the normal skin stays the same, which will fasten the recovery. Patients can return to normal life in 4~5 days.

The treatment itself is safer and can treat any part of the body, for example, skin renewing and resurfacing, wrinkle removal. Skin tightening, acne and scar removal, melasma removal, 

Novus - R Fractional Carbon Dioxide 10600nm

  • No consumables
  • Titanium Articulating Arm
  • Pattern Generator
  • 3 Modes (Fractional, Normal and Ob-gynae
  • Single Pulse, Continuous, and Multi-pulse 
  • 6 User programmable memory settings
  • 2 years standard warranty
  • Annual Maintenance included


Detailed Specifications:

Part#: FG-900S

FDA: 510K161925

Output: 50W

Wavelength: 10,600 nm

Voltage: 110/220v 50/60Hz

Display: 10.4 Color Touch LCD

Pulsed Radiofrequency: 0.530W

Scan Pattern: Square, Rectangle, Round, Triangle, Oval, 6 Diamond Shape, Line or Customized Graphics

Scan Pattern Size: 0.1 x 0.1mm - 20 x 20mm

Scan Mode: Random, Sequence, Max Distance

Spot Size: 0.01 - 0.07mm

Pulse Duration: 0.1 - 2.6 ms adjustable

Spot Distance: 0.1 - 2.6 mm adjustable

Pulse Energy (Power): 1mj to 100mj adjustable on LCD screen

Interval: 0-6s

Laser Type: Sealed RF excited tube

Focus = 50 mm

Beam Divergence Angle: 0.3mrad

Beam Transport: Titanium Articulating Arm